| Nominal diameter | DN15-DN100 |
|---|---|
| Media temperature | -10°C to 120°C |
| Pressure Range | 25 bars |
| Permissible medium | Water services, heating and air- conditioning plants, compressed air systems |
| Connection | Threaded ISO228 (equivalent to DIN 259 and BS 2779 ) |
| Test | Opening/closing test: 10000 times |
| Nominal diameter | DN15-DN100 |
|---|---|
| Media temperature | -10 -120°C |
| Pressure Range | 16 bars |
| Permissible medium | Hot and cold water, oils and domestic water service |
| Connection | Threaded ISO228 (equivalent to DIN 259 and BS 2779) |
| Test | Opening/closing test: 10000 times |
| Nominal diameter | DN15-DN100 |
|---|---|
| Media temperature | -10 -120°C |
| Pressure Range | 16 bars |
| Permissible medium | Hot and cold water, oils and domestic water service |
| Connection | Threaded ISO228 (equivalent to DIN 259 and BS 2779) |
| Test | Opening/closing test: 10000 times |
| Nominal diameter | DN15-DN100 |
|---|---|
| Media temperature | -10 -120°C |
| Pressure Range | 16 bars |
| Permissible medium | Hot and cold water, oils and domestic water service |
| Connection | Threaded ISO228 (equivalent to DIN 259 and BS 2779) |
| Opening/closing test: 10000 times |
| Nominal Diameter | DN40 to DN200 |
|---|---|
| Media temperature | 1°C to 65°C. |
| Max allowable pressure | 25 bars |
| Permissible medium | Clear water, water supply, fire protection, irrigation,drinking water |
| Flange drilling | According to standards EN 1092-2 and ISO 7005-2: ISO PN10, 16 or 25 for DN 50 to 1000 (other drillings on request). |
| Function | Pressure reducing |
| Nominal Diameter | DN40 to DN250 |
|---|---|
| Media temperature | 1°C to 65°C. |
| Max allowable pressure | 10 bars |
| Permissible medium | Clear water, water supply, fire protection, high rise building |
| Function | Control of top water level in reservoirs and storage tanks |
| Torque value | 15Nm-500Nm |
|---|---|
| IP protection | 68 |
| Duty rating | S4-30% motor duty rating. Up to 120 starts per hour at peak of operation. |
| Environment temperature : | -20°C - 60°C |
| Voltage | 1x85-260V AC 50/60Hz 24V DC\1x115/220/230V AC 50/60Hz\3x380-415V AC 50/60Hz\3x440-480V AC 60Hz\24V DC |
| Motor Technology | DC motors with 2-wire connection |
| Manual emergency | Manual emergency operation via manual hexagonal output 10mm |
| Nominal Diameter | DN50 to DN600 (other DN on request) |
|---|---|
| Media temperature | EPDM:-20°C to 150°C\NBR: -10°C to 80°C\Viton:-20°C to 150°C |
| Max allowable pressure | 25 bar |
| Permissible medium | Water, general industry, process, hydrocarbons |
| Flange Connection | PN10/16/25, ASA150/300, JIK10K/16K/ |
| Body | GJL250,GJS400,SS316 |
| Nominal Diameter | DN50-DN100 |
|---|---|
| Media Temperature | -20°C to 200°C |
| Max allowable pressure | 40 bars |
| Permissible medium | General industry, corrosive fluids, steam |
| Flange Connection | PN10/16/25, ASA150/300 |
| Body | Stainless steel CF8 |
| Nominal Diameter | DN50 to DN350 |
|---|---|
| Media temperature | -10°C to 80°C |
| Max allowable pressure | 16 bars |
| Permissible medium | Clean Water, pre-cleaned sewage water, fire proection, HVAC |
| Flange Connection | PN16 |
| Norms | EN 558-1, ISO 5752 and EN 1092-2, ISO 7005-2 flange dimension |
| Body | GJS500-7 |
| Nominal Diameter | DN400 to DN600 |
|---|---|
| Media temperature | -10°C to 80°C |
| Max allowable pressure | 16 bars |
| Permissible medium | Clean Water, pre-cleaned sewage water, fire proection, HVAC |
| Flange Connection | PN16 |
| Norms | EN 558-1, ISO 5752 and EN 1092-2, ISO 7005-2 flange dimension |
| Body | GJS500-7 |
| Nominal Diameter | DN50 to DN350 |
|---|---|
| Media temperature | -10°C to 80°C |
| Max allowable pressure | 25 bars |
| Permissible medium | Clean Water, pre-cleaned sewage water, fire proection, HVAC |
| Flange Connection | PN16 |
| Norms | EN 558-1, ISO 5752 and EN 1092-2, ISO 7005-2 flange dimension |
| Body | GJS500-7 |
| Nominal Diameter | DN400 to DN600 |
|---|---|
| Media temperature | -10°C to 80°C |
| Max allowable pressure | 25 bars |
| Permissible medium | Clean Water, pre-cleaned sewage water, fire proection, HVAC |
| Flange Connection | PN25 |
| Norms | EN 558-1, ISO 5752 and EN 1092-2, ISO 7005-2 flange dimension |
| Body | GJS500-7 |
| Nominal Diameter | DN25 to DN65 |
|---|---|
| Media temperature | -10°C to 70°C |
| Max allowable pressure | 16 bars |
| Permissible medium | Waste Water, Viscose liquid |
| Flange Connection | Threaded F/F |
| Norm | EN12050-4 |
| Face to face dimension | DIN 3202 F6 |
| Body | GJS400 |
| Nominal Diameter | DN50 to DN400 |
|---|---|
| Media temperature | -10°C to 70°C |
| Max allowable pressure | 16 bars till DN150;10 bar above DN150 |
| Permissible medium | Waste Water, Viscose liquid |
| Flange Connection | PN16 |
| Norm | EN12050-4 |
| Face to Face dimension | DIN 3202 F6 |
| Body | GJS400 |
| Nominal Diameter | DN25 to DN50 |
|---|---|
| Media temperature | -10°C to 70°C |
| Max allowable pressure | 16 bars |
| Permissible medium | Waste Water, Viscose liquid |
| Flange Connection | Threaded F/F |
| Norm | EN12050-4 |
| Face to face dimension | DIN 3202 F6 |
| Body | Stainless steel 316 |
| Nominal Diameter | DN50 to DN200 |
|---|---|
| Media temperature | -10°C to 70°C |
| Max allowable pressure | 16 bars till DN100;10 bar above DN100 |
| Permissible medium | Waste Water, Viscose liquid |
| Flange Connection | PN16 |
| Norm | EN12050-4 |
| Face to face dimension | DIN 3202 F6 |
| Face to face dimension | DIN 3202 F6 |
| Body | Stainless steel316 |
| Nominal Diameter | DN50 to DN300 |
|---|---|
| Media temperature | 0°C to 80°C |
| Max allowable pressure | 16 bars |
| Permissible medium | Clear Water, waste water, water supply, pumping station |
| Flange Connection | PN10/16 |
| Norm | EN1092-2 |
| Face to face dimension | DIN F6 |
| Body | Ductile iron GGG40/50 |
| Nominal Diameter | DN50 to DN400 |
|---|---|
| Media temperature | -29°C to 480°C |
| Max allowable pressure | 20 bars |
| Permissible medium | Process fluid, Low concentration of sulphuric acid, petrochemical industry |
| Flange Connection | PN16/ ANSI150 |
| Norm | API 6D |
| Face to face dimension | ASME B16.10 |
| Test & inspection | API 598 |
| Nominal diameter | DN65-DN250 |
|---|---|
| Media temperature | -10°C-120°C |
| Max allowable pressure | 25 bars |
| Permissible medium | Chill and hot water, refrigerant, Glycol |
| Connection | Flanged connection ISO7005-2 |
| DP setting range | 20~80kPa or 40~160kPa |
| Max. working DP | △Pv≤350kPa |
| Nominal diameter | DN15-DN50 |
|---|---|
| Media temperature | -10°C-120°C |
| Max allowable pressure | 25 bars |
| Permissible medium | Chill and hot water, refrigerant, Glycol |
| Connection | Threaded ISO7-1 |
| DP setting range | 5~30kPa or 25~70kPa |
| Max. working DP | △Pv≤250kPa |
| Nominal diameter | DN40-DN500 |
|---|---|
| Media temperature | -10°C-150°C |
| Max allowable pressure | 25 bars |
| Permissible medium | Chill and hot water, refrigerant, Glycol |
| Flange Connection | PN16/25 |
| Flange standard | ISO7005-2 |
| Nominal diameter | DN15-DN50 |
|---|---|
| Media temperature | -10°C-150°C |
| Max allowable pressure | 25 bars |
| Permissible medium | Chill and hot water, refrigerant, Glycol |
| Connection | Threaded ISO7-1 |
| Nominal diameter | DN40-DN600 |
|---|---|
| Media temperature | -10°C-80°C |
| Pressure Range | 16 bars |
| Permissible medium | Clear water, Fire protection, irrigation, sewage |
| Flange Connection | PN10/16 |
| Design standard | EN1171, EN1074 |
| Face to face dimension | EN 558-1, DIN3202 F4/F5, BS5163 |
| Flange drilling | EN 1092-2 |
| Tightness test | EN 12266-1.EN 12266-1 |
| Epoxy coating | 150μm (standard), other thickness on request |
| Nominal diameter | DN40-DN600 |
|---|---|
| Media temperature | -10°C-80°C |
| Pressure Range | 16 bars |
| Permissible medium | Clear water, Fire protection, irrigation, sewage |
| Flange Connection | PN10/16 |
| Design standard | EN1171, EN1074 |
| Face to face dimension | EN 558-1, DIN3202 F4/F5, BS5163 |
| Flange drilling | EN 1092-2 |
| Tightness test | EN 12266-1.EN 12266-1 |
| Epoxy coating | 150μm (standard), other thickness on request |
| Nominal diameter | DN40-DN600 |
|---|---|
| Media temperature | -10°C-80°C |
| Pressure Range | 16 bars |
| Permissible medium | Clear water, Fire protection, irrigation, sewage |
| Flange Connection | PN10/16 |
| Design standard | EN1171, EN1074 |
| Face to face dimension | EN 558-1, DIN3202 F4/F5, BS5163 |
| Flange drilling | EN 1092-2 |
| Tightness test | EN 12266-1.EN 12266-1 |
| Epoxy coating | 150μm (standard), other thickness on request |
| Nominal diameter | DN15-DN500 |
|---|---|
| Media temperature | Water valve(-25~130°C)\Steam valve(2~180°C)\Steam valve(2~220°C)\Steam valve(2~450°C) |
| Max allowable pressure | 25 bars |
| Permissible medium | Chill and hot water, refrigerant, Glycol, Saturated steam,Overheated steam |
| Flange Connection | PN16/25 |
| Type of valve | 2 ways and 3ways |
| Flanged connection | ISO7005-2 |
| Flow characteristic | A-AB equal-percentage flow characteristic\ B-AB equal-linear flow characteristic |
| Ratio | Less than 0.01% Kvs |
| Nominal diameter | DN15-DN50 |
|---|---|
| Media temperature | Water valve(-25~130°C)\Steam valve(2~180°C)\Steam valve(2~220°C)\Steam valve(2~450°C) |
| Max allowable pressure | 25 bars |
| Permissible medium | Chill and hot water, refrigerant, Glycol, Saturated steam,Overheated steam |
| Flange Connection | PN16/25 |
| Type of valve | 2 ways and 3ways |
| Thread connection | |
| Flow characteristic | A-AB equal-percentage flow characteristic\ B-AB equal-linear flow characteristic |
| leackage rate | Less than 0.01% Kvs |
| Nominal diameter | DN40-DN300 |
|---|---|
| Media temperature | -10°C-400°C |
| Pressure Range | 16/325/40 bars |
| Permissible medium | Water, steam, hot oil |
| Flange Connection | PN16/PN25/PN40 |
| Face to face dimension | EN 558-1, DIN3202 F4/F5, BS5163 |
| Flange drilling | DIN3202-1 F1 |
| Tightness test | DIN2533 / DIN2544 / DIN2545 |
| Epoxy coating | 150μm (standard), other thickness on request |
| Nominal Diameter | DN50 to DN1000 |
|---|---|
| Media temperature | 1°C to 65°C. |
| Max allowable pressure | 25 bars |
| Permissible medium | Clear water, water supply, fire protection, irrigation, water treatment station,drinking water or 2 mm filtered untraited water. |
| Flange drilling | According to standards EN 1092-2 and ISO 7005-2: ISO PN10, 16 or 25 for DN 50 to 1000 (other drillings on request). |
| Test of sealing | Class A according to standard ISO 5208-2. |
| Norm of face to face dimension | ISO 5752 series 8 (except DN 300). |
| Body | Ductile iron with Fully protected by cataphoresis epoxy coating |
| Options | Pressure reducing, pressure relief, pressure differential, flow limiter, overspeed, altitude valve, float valve,non return valve with slow opening and closing,booster pump protection, pump control valve, surge anticipating valve (anti water hammer valve), on/off electric remote control... |
| Max Permissible Pressure | 1000kPa |
|---|---|
| DP Measurement Range | up to 1000kPa |
| Pressure Range | 3~1000kPa |
| Medium Temperature | -20~120°C |
| Measurement Deviation | DP Sensor < 0.5% Flow: DP Deviation + Valve Deviation |
| Battery Capacity | 3000mA |
| Operating Time | >20h |
| Charge Time | 6h |
| Protection Level | IP64 |
| Ambient Temperature | Operating and Charging: 0~40°C Storage Status: -20~60°C |
| Ambient Humidity | max 90%RH |
| Charger | Output Voltage: 12.6V DC Output Current: 500mA |
| Applicable System | Android |
| Dimension | L*W*H = 470*355*150mm |
| Electric actuator spec G: | |
| Electric actuator spec H: |
| Nominal diameter | DN50-DN1200 |
|---|---|
| Media temperature | EPDM:-20-120°C\NBR:-20-90°C\Viton:-10 -180°C\PTFE:-196 -200°C\Silicon:-60°C-225°\Metal seat: Depending on body & packing materialC |
| Pressure Range | 10 bars till DN200, above DN consult datasheet |
| Permissible medium | Pulp and paper , water treatment, wasted water, powdery and crystallizing chemical products, wine, cement, pneumatic transportation, storage. |
| End connection | Wafer, lug |
| Flange connection | EN1092-1 PN10/16 \ASME B16.5 Class150\ASME B16.47 Class150 Series A\JIS B 2238 10K\BS 10 Table D |
| Tightness test standard | EN 12266-1\DIN3230\ISO5208\MSS SP-81 |
| Tightness test of shell | According to EN12266-1 Resistance and tightness of the body : test P11 (1,5 x allowable operating pressure) |
| Tightness of the seat | According to EN12266-2 Test P12 rate A (1,1 x allowable Operating pressure) |
| ATEX design | ATEX 97/9/EC\Ex Il 3 c GID Zone 2 and 22 upon request |
| Option of body | Dutile iron GG25, Stainless steel CF8M |
| Nominal diameter | DN50-DN1200 |
|---|---|
| Media temperature | EPDM:-20-120°C\NBR:-20-90°C\Viton:-10 -180°C\PTFE:-196 -200°C\Silicon:-60°C-225°\Metal seat: Depending on body & packing materialC |
| Pressure Range | 10 bars till DN200, above DN consult datasheet |
| Permissible medium | Pulp and paper , water treatment, wasted water, powdery and crystallizing chemical products, wine, cement, pneumatic transportation, storage. |
| End connection | Wafer, lug |
| Flange connection | EN1092-1 PN10/16 \ASME B16.5 Class150\ASME B16.47 Class150 Series A\JIS B 2238 10K\BS 10 Table D |
| Tightness test standard | EN 12266-1\DIN3230\ISO5208\MSS SP-81 |
| Tightness test of shell | According to EN12266-1 Resistance and tightness of the body : test P11 (1,5 x allowable operating pressure) |
| Tightness of the seat | According to EN12266-2 Test P12 rate A (1,1 x allowable Operating pressure) |
| ATEX design | ATEX 97/9/EC\Ex Il 3 c GID Zone 2 and 22 upon request |
| Option of body | Dutile iron GG25, Stainless steel CF8M |
| Torque value | 20Nm-6000Nm |
|---|---|
| IP protection | 67 |
| Duty rating | 50% |
| Environment temperature : | 0°C - 80°C |
| Rotation | 90°, 180°, 270° |
| Voltage | AC 24V/110V/220V/380V, DC24V |
| Application | Butterfly valves (till DN700/800) \Ball valves (till DN200/300) \Globe valves |
| Options: | H class Over torque limiter \Anti-condensation heater\ Fail safe\ Potentiometer: 1K, 3K, 5K\DC 4 to 20mA / DC 1 to5 V position feedback |
| Torques | 3-10000NM |
|---|---|
| Environment temperature | -20°C to 160°C |
| Rotation angle | 30 °,45°,60°,90°,120°,180° |
| Air supply | 0.2-1.0 Mpa |
| Standard | VDI/VDE 3845 /NAMUR |
| Top flange | ISO5211 |
| Application | Butterfly valve, ball valve |
| Nominal diameter | DN15-DN25 |
|---|---|
| Media temperature | -10°C-120°C |
| Max allowable pressure | 16, 25 bars |
| Permissible medium | Chilled/hot water,glycol under 50% |
| Connection | F/F threaded connection ISO7-1 |
| Flow Characteristic | Linear flow characteristic |
| Leakage acc. to standard IEC 534 | Less than 0.02% of KVS |
| Voltage | 220VAC 50/60Hz |
| Power consumption | ≥2W |
| Effective troque | 100N |
| Effective stroke | ≥4mm |
| Operating environment | Temperature -10~60°C |
| Connection thread | M30*1.5 |
| Protection level | IP54 |
| Cable | 2*0.75mm 2 |
| Nominal diameter | DN50-DN250 |
|---|---|
| Media temperature | -10°C-120°C |
| Max allowable pressure | 16, 25 bars |
| Permissible medium | Chilled/hot water,glycol under 50% |
| Connection | Flanged connection ISO7005-2 |
| Flow Characteristic | Equal-percentage and linear |
| Leakage acc. to standard IEC 534 | Less than 0.02% of KVS |
| Voltage | 24VAC± 15%,24VDC+ 15% 110~230VAC |
| Electric actuator spec A: | RS485 Remote Control |
| Electric actuator spec B: | NFC (Near Field Communication),The actuator has NFC function which can not only control opening and closing of valve by mobile NFC client, but also set a number of parameters. NFC function can still read actuator parameter even if the actuator is powered off on site. |
| Electric actuator spec C: | The actuator has the self-stroking function.It can automatcially measure the valve stroke. |
| Electric actuator spec D: | The high/low speed can be switched through DIP switch. 500/1000/3000N: high speed 1s/mm, middle speed 2s/mm; 5000N: high speed 2s/mm, middle speed 4s/mm. |
| Electric actuator spec E: | The actuator has the mechanical manual function and manual priority function, that is, when insert the wrench, the actuator will be automatically powered off which is safe and convinent. |
| Electric actuator spec F: | The actuator has local control function which can control the opening and closing of valve by the button on the plate. |
| Electric actuator spec G: | There are LED indicating lights on the actuator cover which is convenient to observe the actuator running status. |
| Electric actuator spec H: | IP54 |
| Nominal diameter | DN25-DN50 |
|---|---|
| Media temperature | -10°C-120°C |
| Max allowable pressure | 16, 25 bars |
| Permissible medium | Chilled/hot water,glycol under 50% |
| Connection | F/F Threaded ISO7-1 |
| Flow Characteristic | Equal-percentage flow characteristic |
| Leakage acc. to standard IEC 534 | Less than 0.02% of KVS |
| Voltage | 24VAC± 15%,24VDC+ 15% 110~230VAC |
| Electric actuator spec A: | RS485 Remote Control |
| Electric actuator spec B: | NFC (Near Field Communication),The actuator has NFC function which can not only control opening and closing of valve by mobile NFC client, but also set a number of parameters. NFC function can still read actuator parameter even if the actuator is powered off on site. |
| Electric actuator spec C: | The actuator has the self-stroking function.It can automatcially measure the valve stroke. |
| Electric actuator spec D: | The high/low speed can be switched through DIP switch. 500/1000/3000N: high speed 1s/mm, middle speed 2s/mm; 5000N: high speed 2s/mm, middle speed 4s/mm. |
| Electric actuator spec E: | The actuator has the mechanical manual function and manual priority function, that is, when insert the wrench, the actuator will be automatically powered off which is safe and convinent. |
| Electric actuator spec F: | The actuator has local control function which can control the opening and closing of valve by the button on the plate. |
| Electric actuator spec G: | There are LED indicating lights on the actuator cover which is convenient to observe the actuator running status. |
| Electric actuator spec H: | IP54 |
| Nominal diameter | DN15-DN50 |
|---|---|
| Media temperature | -10°C to 80°C |
| Pressure Range | 16 bars |
| Permissible medium | Hot and cold water, building services, general water supply |
| Connection | Threaded, NPT, BSP, DIN259 |
| Down stream setting range: | 0,7 to 4 bar |
| Nominal diameter | DN15-DN50 |
|---|---|
| Media temperature | -10°C to 80°C |
| Pressure Range | 16 bars |
| Permissible medium | Hot and cold water, building services, general water supply |
| Connection | Threaded, NPT, BSP, DIN259 |
| Down stream setting range: | 0,7 to 4 bar |
| Nominal diameter | DN15-DN100 |
|---|---|
| Media temperature | -10°C to 120°C |
| Pressure Range | 25 bars |
| Permissible medium | Water services, heating and air- conditioning plants, compressed air systems |
| Connection | Threaded ISO228 (equivalent to DIN 259 and BS 2779 ) |
| Test | Opening/closing test: 10000 times |
| Body | Brass-CW614 |
| Nominal diameter | DN 1/2"-DN3" |
|---|---|
| Media temperature | EPDM:-10°C-95°C\NBR:-10°C-75°C |
| Pressure Range | 16 bars |
| Permissible medium | EPDM:Water distribution, heating and HVAC\NBR: Oil, hydrocarbon, air |
| Application | Absorb vibrations, noises, expension |
| Connection | galvanised ductile iron union nut connections |
| Rubber | EPDM, NBR |
| Nominal diameter | DN40-600 |
|---|---|
| Media temperature | EPDM:-10°C-95°C/NBR:-10°C-75°C |
| Pressure Range | 16 bars till DN300, above 10 bars |
| Permissible medium | EPDM:Water distribution, heating and HVAC /NBR: Oil, hydrocarbon, air |
| Application | Absorb vibrations, noises, expension |
| Connection | galvanised ductile iron union nut connections |
| Rubber | EPDM, NBR |
| Nominal diameter | DN15-DN50 |
|---|---|
| Media temperature | -25~120°C |
| Max allowable pressure | 25 bars |
| Permissible medium | Chill and hot water, refrigerant, glycol solution (<50%) |
| Flange Connection | PN16/25 |
| Type of valve | 2 ways valve |
| Threaded connection | FF ISO7-1 |
| Flow characteristic | A-AB equal-percentage flow characteristic |
| Rangeability | >100:1 |
| Lifetime | 100 000 times full open and close |
| Environment temperature and humidity | -15~+55°C, ≤95% RH |
| Protection level | IP54 |
| Nominal diameter | DN15-DN50 |
|---|---|
| Media temperature | -25~120°C |
| Max allowable pressure | 25 bars |
| Permissible medium | Chill and hot water, refrigerant, glycol solution (<50%) |
| Flange Connection | PN16/25 |
| Type of valve | 2 ways valve |
| Threaded connection | FF ISO7-1 |
| Flow characteristic | A-AB equal-percentage flow characteristic |
| Rangeability | >100:1 |
| Lifetime | 100 000 times full open and close |
| Environment temperature and humidity | -15~+55°C, ≤95% RH |
| Protection level | IP54 |
| Nominal diameter | DN15-DN50 |
|---|---|
| Media temperature | -25~120°C |
| Max allowable pressure | 25 bars |
| Permissible medium | Chill and hot water, refrigerant, glycol solution (<50%) |
| Flange Connection | PN16/25 |
| Type of valve | 2 ways valve |
| Threaded connection | FF ISO7-1 |
| Flow characteristic | A-AB equal-percentage flow characteristic |
| Rangeability | >100:1 |
| Lifetime | 100 000 times full open and close |
| Environment temperature and humidity | -15~+55°C, ≤95% RH |
| Protection level | IP54 |
| Nominal diameter | DN32-DN400 |
|---|---|
| Media temperature | -20°C to 100°C |
| Max allowable pressure | 16 bars |
| Permissible medium | Water, oil |
| Flange Connection | PN10/PN10 |
| Face to Face dimension | DIN 3202 F1 |
| Body | GJL500/GJS400 |
| Nominal diameter | DN50-DN300 |
|---|---|
| Connection | Wafer, Lug |
| Media temperature | EPDM:-10°C to 100°C\NBR:-10°C to 80°C\PTFE:-40 to 200°C |
| Pressure Range | 10/16 bars |
| Permissible medium | EPDM : hot water, cold water HVAC, Irrigation etc. NBR: hydrocarbons, waster water, Sea water fuel, natural gas, oil, grease, compressed air, glycol |
| Flange Connection | PN10/16, ASA150, JIK10K |
| Design standard | EN593 |
| Face to face | EN 558-Series 20 and 13/ ISO 5752 series 20/ API 609 table 2 |
| Tightness test of shell | According to EN12266-1 Resistance and tightness of the body : test P11 (1,5 x allowable operating pressure) |
| Tightness of the seat | According to EN12266-2 Test P12 rate A (1,1 x allowable Operating pressure) |
| Nominal diameter | Wafer:DN25-DN1200\Lug: DN50-DN1200\Double flange: DN50-DN1200 |
|---|---|
| Connection | Wafer\ Lug\double flange |
| Media temperature | EPDM:-10°C to 100°C\NBR:-10°C to 80°C\FKM:-5°C to 180°C\Silicon:-40°C to 150°C |
| Pressure Range | 10/16 bars |
| Permissible medium | -EPDM : hot water, cold water HVAC, Irrigation\ -NBR: hydrocarbons, waster water, Sea water fuel, natural gas, oil, grease, compressed air, glycol\-FKM:acid,oil, gasoline,glycenne,hydrocarbure,biogaz\-Silicon:high temperature oil, acid,air |
| Flange Connection | PN10/16, ASA150, JIK10K |
| Design standard | EN593 |
| Face to face | EN 558-Series 20 and 13/ ISO 5752 series 20/ API 609 table 2 |
| Tightness test of shell | According to EN12266-1 Resistance and tightness of the body : test P11 (1,5 x allowable operating pressure) |
| Tightness of the seat | According to EN12266-2 Test P12 rate A (1,1 x allowable Operating pressure) |
| Nominal diameter | DN50-DN300 |
|---|---|
| Connection | Wafer, Lug |
| Media temperature | EPDM:-10°C to 100°C\NBR:-10°C to 80°C |
| Pressure Range | 10/16/20/25 bars |
| Permissible medium | EPDM : hot water, cold water HVAC, Irrigation etc. NBR: hydrocarbons, waster water, Sea water fuel, natural gas, oil, grease, compressed air, glycol |
| Flange Connection | PN10/16/25, ASA150, JIK10K |
| Design standard | EN593 |
| Face to face | EN 558-Series 20 and 13/ ISO 5752 series 20/ API 609 table 2 |
| Tightness test of shell | According to EN12266-1 Resistance and tightness of the body : test P11 (1,5 x allowable operating pressure) |
| Tightness of the seat | According to EN12266-2 Test P12 rate A (1,1 x allowable Operating pressure) |